XT 1600W 1/2" Plunge Router with Kitbox
XTW1500EKA
| Power |
1600 W |
| Voltage |
230 V |
| Speed |
Variable rpm |
| No Load Speed |
11,000 - 28,000 rpm |
| Plunge depth |
60 mm |
| Collet Size |
6, 6.35, 8, 12.7 mm |
| Maximum cutter diameter |
42 mm |
| Spindle Lock |
Yes |
| Dust extraction |
Yes |
| Cable length |
4 m |
| Soft trigger |
No |
| Soft grip |
Yes |
| Kitbox |
Yes |
| Accessories supplied |
Yes |
| Excentricity |
|
| Orbit diameter |
|
| Dust Extraction [sanders] |
|
| Paper attachment |
|
| Paper size / area |
|
| Platten size |
|
| Platten shape |
|
| Sanding actions |
|
| Chuck |
|
| Chuck Size |
|
| Hammer |
|
| Drill only action |
|
| Max. capacity - wood |
|
| Max. capacity - steel |
|
| Max capacity - masonry |
|
| Reverse |
|
| Adjustable depth stop |
|
| Secondary handle |
|
| Two gears |
|
| Adjustable 2nd handle |
|
| Lock-on switch |
|
| Strokes |
|
| Tool free blade clamp |
|
| 'Lock On' Switch |
|
| Bevel cut |
|
| Dust Blower |
|
| Depth of cut - Wood |
|
| Depth of cut - Steel |
|
| Depth of cut - Aluminium |
|
Details
- 1600W motor for longlife and high performance
- 6 1/2" router bits included for immediate use
- Kit box included for easy storage of tool and accessories
- 3 collets provided to suit all shank sizes below 12mm
- Flat motor housing enables product to be stood upside down for easier bit change
- Lock off trigger for enhanced safety
- Spindle lock for easy cutter change
- Variable speed gives the user more control to prevent burning of the material being shaped
- Large side handles give a sure grip for improved safety and control
Specifications
| Power |
1600 W |
| Voltage |
230 V |
| Speed |
Variable rpm |
| No Load Speed |
11,000 - 28,000 rpm |
| Plunge depth |
60 mm |
| Collet Size |
6, 6.35, 8, 12.7 mm |
| Maximum cutter diameter |
42 mm |
| Spindle Lock |
Yes |
| Dust extraction |
Yes |
| Cable length |
4 m |
| Soft trigger |
No |
| Soft grip |
Yes |
| Kitbox |
Yes |
| Accessories supplied |
Yes |
| Excentricity |
|
| Orbit diameter |
|
| Dust Extraction [sanders] |
|
| Paper attachment |
|
| Paper size / area |
|
| Platten size |
|
| Platten shape |
|
| Sanding actions |
|
| Chuck |
|
| Chuck Size |
|
| Hammer |
|
| Drill only action |
|
| Max. capacity - wood |
|
| Max. capacity - steel |
|
| Max capacity - masonry |
|
| Reverse |
|
| Adjustable depth stop |
|
| Secondary handle |
|
| Two gears |
|
| Adjustable 2nd handle |
|
| Lock-on switch |
|
| Strokes |
|
| Tool free blade clamp |
|
| 'Lock On' Switch |
|
| Bevel cut |
|
| Dust Blower |
|
| Depth of cut - Wood |
|
| Depth of cut - Steel |
|
| Depth of cut - Aluminium |
|
Uses
- Routing decorative edges on timber e.g. for shelves
- Routing accurate joints e.g. dovetails
- Fitting door hinges and door locks
- Wood carving on flat surfaces
- Cutting elipses (accessory not supplied) and circles
